35
Adjustment tips for the operating menu
Via the “
Command
” menu, you can determine which of the audio and
command outputs will be switched on and off when the command button
on the transmitter is pressed. There are four configuration options:
The active output lights up in the command display; muted outputs are not
displayed (see “Command display (status display of the audio outputs AF
and Command)” on page 12).
왘
Change to the setting mode of the “
Command
” menu.
The current configuration starts flashing.
왘
Select one of the four configurations by turning the jog dial
7
.
왘
Press the
save
button
8
.
The selected configuration is stored. The display changes to the
selection mode of the operating menu.
Changing to the extended menu
Via the “
More
” menu, you can change to the extended menu with the
menus “
Scan
”, “
Display
”, “
IP-Addr
”, “
MAC
”, “
Standby
” and “
Reset
”.
WHEN the “Command”
menu of the receiver is
configured as shown …
… AND the
command button
on the transmitter
is …
… THEN the receiver’s
audio outputs are
switched ...
not pressed
AF Out:
on
Command: off
pressed
AF Out:
on
Command: on
not pressed
AF Out:
on
Command: off
pressed
AF Out:
off
Command: on
not pressed
AF Out:
on
Command: on
pressed
AF Out:
off
Command: on
not pressed
AF Out:
on
Command: on
pressed
AF Out:
on
Command: on
1
AF
COM
AF
AF
AF
COM
2
AF
COM
AF
COM
3
COM
AF
COM
AF
COM
COM
4
COM
AF
COM
AF
AF
COM
AF
COM
1
AF
COM
AF
esc
s
ave
syn
c
digital audio
processing
syn
c
DEV
M
H
z
777.005
U.01
BANK
CH
COM
AF
8
7
If you do not want to use the command function, select the
configuration “
4
”.
More
mmand
3
