Sennheiser EM 100 G4 Page 67 Instruction Manual Download

Page: 67 / 129

Using the EM 100 G4

Performing multi-channel frequency setup

To perform the automatic frequency setup for multiple receivers (max. 12)
simultaneously:

▷

Connect all of the receivers to one network.

See “Creating a data network”.

▷

Open the

Easy Setup

menu item on one of the receivers.

This receiver is the master. You can choose any receiver to be the mas-
ter.

▷

Perform the frequency scan on the master receiver as described above.

After the scan, the display panels of the other receivers will display the
message

Assign New Frequency?

Receivers with non-compatible frequency ranges will display the mes-
sage

Unassignable Frequency!

▷

Select an unused frequency for the first receiver on the master receiv-
er.

▷

Press the

SET

button on the receiver that you would like to assign this

frequency to.

▷

Use this procedure to assign a frequency to each connected receiver,
one after another.

▷

For the last step, assign a frequency to the master receiver.

This completes the multi-channel frequency setup.

►

Summary of Contents for EM 100 G4


































































































































Search results

Summary of Contents for EM 100 G4

Reviews:

Related manuals for EM 100 G4

Brands by name

Popular brands

Sennheiser EM 100 G4, Instruction Manual

Search results

Summary of Contents for EM 100 G4

Reviews:

Related manuals for EM 100 G4

Brands by name

Popular brands