48
Using the receiver
Switching the receiver on/off
The receiver can only be switched off when the standard
display is shown on the display panel. When in the
operating menu, briefly pressing the
ON
/
OFF
button will
cancel your entry (ESC function) and return you to the
standard display with the last stored settings.
Note:
Remove the batteries or the accupack when the receiver
will not be used for extended periods of time.
Press the two unlocking buttons
and open the
battery compartment cover
.
Press the
ON
/
OFF
button
to switch the receiver on.
The red LED
lights up.
To switch the receiver off, press the
ON
/
OFF
button
until “OFF” appears on the display. The red LED
goes
off.
Close the battery compartment. The battery
compartment cover
locks into place with an audible
click.
Connecting the headphones
To monitor the audio signal, connect headphones with a
3.5 mm jack plug to the headphone output (PHONES)
.
ew_500_EK.book Seite 48 Dienstag, 4. November 2003 11:05 11