![background image](http://html1.mh-extra.com/html/sennheiser/ek-2013-pll/ek-2013-pll_instructions-for-use-manual_1242669008.webp)
Frequency selection
D
2.7
Setting channels on transmitter and receiver
The transmission frequencies are set with the rotary switch (
D
) on the transmitter and
receiver. The assignment of a switch position to a frequency is listed on the back of the
unit on the information plate. Depending on the model, up to 16 frequencies are available.
This allows multi-channel operation, e.g. in schools.
Important information:
•
The transmitter and receiver of one transmission unit must be
set to the same frequency!
•
One transmitter
can be used
with several receivers
set to the same frequency.
•
One receiver cannot be used with several transmitters
set to one frequency! This
type of incorrect setting can be noticed from crackling and chirping noises at the receiver.