Sennheiser Digital 9000, Instruction Manual

Page: 70 / 130

Using the EM 9046
68 | Digital 9000
• In addition, all configurations saved in the “ save config ” menu item are
deleted.
• The event log is deleted and then the deleting itself is logged.
The following settings/values are not deleted:
• time and date settings of the “ Date & time ” menu item (see page 68)
and
• operating hours (displayable in the “ op hours ” menu item, see page
69).
“Date & time” – Adjusting the date and time
Via the “ Date & time ” menu item, you can select your time zone and then
adjust the date and time:
Main menu
“
Channel
setup ”
Frequency Without connected
boosters:
470.000 MHz
With connected boosters:
A1.1–A1.8
or
B1.1–B1.8,
allocated to the channels
1–8
76
Name Ch1–Ch6 77
Cmd mode Toggle 77
Encryption Off 78
Gain 0 dB 81
Low cut 30 Hz 81
Display Name 82
Lock Off 82
Cable Line 82
Menu Menu item Factory default setting Page
16:30:41
2011-06-14
date & time
Dublin, Edinburgh, Lisbon, London
Timezone
Date: 2011-07-25
Time: 15:46:32
Network time: on