![background image](http://html.mh-extra.com/html/sennheiser/d-10-bs-usb/d-10-bs-usb_instruction-manual_1241155041.webp)
Manufacturer Declarations
D 10 series
| 40
Statement regarding FCC
This equipment has been tested and found to comply with the limits for a Class
B digital device of the FCC Rules, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment not expressly approved by
Sennheiser electronic Corp. may void the FCC authorization to operate this
equipment.
The headset D
10
HS complies with FCC RF radiation exposure limits for devices
used by the general public. It has been tested for SAR and has complied with
Industry Canada SAR limits for devices used by the general public.
Statement regarding Industry Canada
This device complies with RSS-213 Issue 2 of the Industry Canada Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The headset D
10
HS complies with Industry Canada RF radiation exposure
limits for devices used by the general public. It has been tested for SAR and has
complied with Industry Canada SAR limits for devices used by the general
public.
Trademarks
Sennheiser is a registered trademark of Sennheiser electronic GmbH & Co. KG.
Other product and company names mentioned in this instruction manual may
be the trademarks or registered trademarks of their respective owners.
SENNHEISER
Model No:
FCC Declaration of Conformity (DoC)
We,
Sennheiser Electronic Corporation
One Enterprise Drive • Old Lyme •
CT 06371 • USA
Tel: +1 (860) 434 9190, ext. 144
Fax: +1 (860) 434 1759
declare the above device comply with the requirements of Federal Communications Commission.
This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
Responsible Party: Greg Beebe
D 10 BS Phone-US, D 10 BS USB-US,
D 10 BS USB ML-US