![background image](http://html.mh-extra.com/html/sennheiser/d-10-bs-usb/d-10-bs-usb_instruction-manual_1241155032.webp)
Charging the headset and storing the headset system
31 |
D 10 series
Switching the headset system off during extended
non-use
You can switch off the headset system (
1
) or the headset (
2
) when not
using the products for extended periods of time (e.g. when you are on
holiday).
Switching the headset system off
1
Disconnect the base station from the mains power supply. The base
station switches off immediately, the headset switches off about
30 minutes later.
2
Press and hold the Link button for 5 seconds to switch off the headset
immediately. The Headset LED flashes red 3 times, the headset is
switched off completely.
The Link LED
on the base station lights up red after a short time, the
Charge status LED on the base station goes off.
Switching the headset system on and pairing the components
왘
Plug the power supply unit into a wall socket. The base station is
switched on.
왘
Place the headset into the magnetic holder of the base station. The
Headset LED flashes blue 3 times and then lights up blue. The base
station and the headset are paired.
1
2
5 s
3x
0
3
6
9
1 2 3 4 5 6