18
Connecting the antennas
왘
You can connect the following antenna types to the
antenna inputs
and
:
!
two A 1031-U or A 2003-U passive antennas or
!
two A 12 active antennas or
!
a combination of passive antenna (A 1031-U or
A 2003-U) and antenna booster (AB 2).
Connecting the receivers
You can connect up to four rack-mount receivers (e.g.
EM 100 G2, EM 300 G2 or EM 500 G2) to the ASP 2. The split-
ter incorporates DC distribution for powering the receivers.
왘
Pass the cables coming from the antenna spitter’s DC out-
puts
through the cable grips
at the rear of the recei-
vers.
왘
Insert the hollow jack plugs into the sockets
of the recei-
vers.
왘
Connect the BNC cables
and
of the antenna splitter to
the receivers as follows:
!
Antenna outputs (OUT A)
to antenna inputs (ANT I)
!
Antenna outputs (OUT B)
to antenna inputs (ANT II)
Note!
We recommend protecting unused RF outputs with a 50
Ω
terminator in order to keep to the specified distribution
attenuation.
ASP 2
ASP 2
ASP 2
EM 500 G2
EM 500 G2
