Putting the AMBEO Soundbar into operation
AMBEO Soundbar | 29
Calibrating the Soundbar
▷
Straighten up the microphone in the microphone holder.
▷
Place the microphone with the microphone holder on the seat in
front of the Soundbar. The microphone head should be located
approximately at ear height during normal use.
▷
Connect the jack plug of the microphone cable to the
microphone
input
on the Soundbar.
2
1
3
▷
Press the
AMBEO
button on the top of the Soundbar or the
AMBEO
button on the remote control.
The
display
shows “Please step to the side”.
Please note that the test tones are played at a high volume during
calibration.
▷
Avoid disturbing noises (open windows, household appliances,
etc.) and do not stay between the Soundbar and the microphone
as this can falsify the calibration.
The
display
shows a countdown for the start of the calibration
“Calibration starts in 10 / 9 / ...”.
The calibration process takes several minutes.
The
display
shows “Done!” and “Press AMBEO to finalize”.
▷
Press the
AMBEO
button on the top of the Soundbar or the
AMBEO
button on the remote control.
The
display
shows “Welcome”. The AMBEO demo sound is played
(approx. 10 seconds).
▷
Disconnect the jack plug of the microphone cable from the
micro-
phone input
on the Soundbar.