Sennheiser ADN-W AM, Instruction Manual

Page: 15 / 18

Cleaning and maintaining the antenna module
ADN-W AM | 13
one wireless conference system is in use and if the default
eavesdropping protection is sufficient.
– Closed access mode (“ Wireless Menu ” > “ Access Mode ” >
“ Closed ”)
Only wireless conference units whose serial numbers are listed in
a participant list can be used in the wireless conference. If several
wireless conferences are held simultaneously, the closed access
mode ensures that the wireless conference units connect to the
correct conference system. This access mode increases the pro-
tection against eavesdropping because only selected and
enabled wireless conference units can be used.
Cleaning and maintaining the
antenna module
왘
Only use a dry and soft cloth to clean the product.
Specifications ADN-W AM
Further information on how to configure the wireless confer-
ence components can be found in the ADN system manual.
RF frequency range 2.4 GHz; 5.1 to 5.9 GHz
RF output power 25 to 100 mW (depending on the selected
country/region)
Power supply 12 to 15 V
alternatively via ADN
PORT bus 52.8 V
Power consumption 6 W
Antennas 3 rod antennas with R-SMA connection
Transmission range typ. 30 m
Mounting thread 5/8" and 3/8" thread insert
Temperature range operation: +5°C to +45°C
storage: -25°C to +70°C
Relative humidity operation: 20 to 95%
storage: 10 to 90%
Dimensions (W x H x D) approx. 226 x 181 x 58 mm
Weight approx. 1,660 g