Using the RS 160
18
Using the RS 160
To switch the product on and to listen to your sound source, proceed as
follows:
Switching the transmitter on and off
Switching the transmitter on
왘
Press the multi-function button
햲
for approx. 1 second.
The transmitter switches on. The multi-function LED
햳
flashes green,
indicating that the transmitter is in enrollment mode.
Once the transmitter has found suitable headphones, it pairs with the
headphones and transmits an audio signal. The multi-function LED
쐊
of the headphones and the multi-function LED
햳
of the transmitter
flash slowly.
Sequence of steps
Page
1. Make sure that the rechargeable batteries are charged.
16
2. Switch your sound source on.
–
3. Switch your transmitter on.
18
4. Switch your headphones on.
20
5. Adjust the desired volume.
21
1s
5s
2
1
쐊