3 SCT-1034 Ver. 1.0
SETTING THE SWITCHES
To set the configuration switches, remove the
back panel, which is secured by two screws.
Then slide the cover back to expose the
switches. The switches can be changed while
the code translator is powered up and the new
settings will take effect immediately.
CONFIGURATION
SWITCH
SW1-1
BIPHASE CODE TYPE
ON: VARIABLE SPEED
OFF: FIXED SPEED
Set to ON if the receivers can accept
variable speed biphase code
Set to OFF for older receivers that only
recognize fixed speed commands
1 2 3 4 5 6 7 8
ON
OFF
