SenNet Pulse Counter Sigfox
www.satel-iberia.com
2
Input signals
This device is used to measure any type of meter with output pulse (reed or transistorized type) with low
frecuency.
Battery life
This device is desing to very long life. Life of batteries will depend of three variables:
type message , interval to send, number of impulses readed. Adjust interval to send and type of message by
customer requeriment
If your rate of pulse counter is very high, use power supply versión.
wall mount (by default)
rail din mount (accesory)
*specify on your order
Type input pulse
Maximum frecuency
10Hz
Type
Reed / transistorizado
Leakage current (close reed)
40uA *
*For industrials enviroment is it possible increase this leakeage current to avoid
detect electrical noise like an impulse. Contact with our support team.
Battery life estimation
Type message 1 / 20 minutes sends
7 years*
Type message 2 / 20 minutes sends
6 years*
*Main condition, low rate of pulse.
Holding case
IP Grade
IP-60*
Temperature details
Working temperature
-20ºC...+70ºC
Store temperature
-20ºC...+75ºC
Holding
Dimensions
119 x 111 x 53 mm
Type mount
Wall or din rail
Plastic Material
ABS
–
V0
*If you need an upper grade contact with out support team.
