Prepared by KM 11/2015
19 Patent pending
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544
www.sennco.com | [email protected]
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
VIII. Points of Sensing
B. Sensor head plunger
C. Sensor head proximity
A. Micro USB power cable
If the Micro USB power cable is unplugged from the protected device, or from the sensor head, or if it is cut then the main alarm will immediately
be triggered.
If the sensor head is removed from the back of the protected device then the main alarm will immediately be triggered.
If the sensor head is outside of the “safe zone” created by the bubble makers for more than 10 seconds then the main alarm will be triggered.
IX. Hard Reset
The entire system can be reset by inserting a recognized DaKey into the main alarm and then holding down the button on the front of the main
alarm for longer than 10 seconds.
