1
Senko Co., Ltd. guarantees the products of SP series for 24 months from the
shipping date and repairs or replaces the defected product during warranty
period at no cost. Nevertheless, Senko is not responsible for the following
cases and would not repair or replace the product at no cost, such cases as the
product has been purchased through the route that Senko does not approve, or
as the product has been damaged or deformed mechanically by misuse of the
user, or as the product has not been calibrated or replaced the parts according
to processes in the operating manual.
For the safety of users, workers and operators are to be fully alerted about the
alarm circumstances by the loud alarm sound and warning icon displayed on
LCD monitor when gas concentration is detected in excess of regulatory
standard. In addition, a suction pump is built-in it and also featured with the
function of On/Off for the pump and alarm sound so that the user can set up
alarm values to properly meet with the circumstances involved and the alarm
value such set up can be adjusted to best fit to the type of gas and
circumstances of leakage.
SP Secure provides quick response to inflammable
gas and also prevents in advance workers from the explosion by the leakage of
gas and high risk of asphyxiation that may be resulted by the exposure to toxic
gas for a certain period of time.
In the event that any defect or issue of the product occurred during warranty
period, Senko will cover all the expenses except transportation fee. After the
period of warranty, the expenses of repair or replacement of the product and
transportation will be in principle borne by the user.
Senko will not be
responsible for any indirect occurrence or accident and/or damage during the
use of the product, and the guarantee shall be limited to the replacement of
parts and product. The guarantee is applied only to the users who purchased
the product at Senko’s authorized dealers or agents, and the guarantied repair is
to be performed by the expert engineers of Senko’s authorized aftercare center.
Guarantee and Repair
Introduction
SP Secure is a portable gas leakage detector necessary to secure user’s safety
and protect industrial facilities by detecting leakage of gas in earlier stage at the
dangerous work environment where risk of explosion always exists. As it is
configured with two buttons only, the method of operation and sensor
calibration is easy and convenient. Also the %LEL and concentration value of
inflammable gas (LPG / LNG, hydrogen, etc) can be displayed on a digital LCD
monitor.
