Installation Instructions:
The following instructions are applicable to adding your
Smart Plug to a Sengled Smart Hub. If you DO NOT have
Sengled Smart Hub and Sengled Home app previously
installed, please install your hub according to its user
guide in the package before installing bulbs. If you have
third-party hubs, such as SmartThings or Amazon Echo
Plus, you also can connect Sengled Smart bulbs to these
hubs according to their instructions in apps. If you would
like to find our latest list of supported third party hubs,
please refer to support.sengled.com.
Note:
Please ensure your mobile device is connected to
the same wireless router that your Sengled smart hub is
connected with using 2.4G Hz.
1
Open the
Sengled Home
app.
Go to Devices, select the + sign,
and choose
Smart Plugs
or
Smart
LEDs and Accessories
(Use with Hub).
Follow in-app instructions to finish installation.
2
Ensure your Sengled Home app can discover the
plugs. If the app unsuccessfully discovers the
plugs, please refer to the next section "Reset
Instructions" for how to reset your plug before
attempting to add it back in.
Congratulations on successfully installing your
smart plugs!
Reset Instructions:
To reset your Sengled Smart Plug, please make sure it’s
plugged into an outlet, then push the power button and
hold it for more than five seconds, then release. The
purple indicator light will flash five times, then slowly
pulse red on and off. If it does not pulse, please try
power cycle and reset it again. Once successfully reset,
please pair your Smart Plug again in your Sengled
Home app.
2
