24
Step 2 Determine the positions for drilling holes (as shown in Figure 4.9) using the rear
panel.
Figure 4.9
Determine the positions for drilling holes
（
unit
：
mm)
Step 3 Level the hole positions using a level, and mark the hole positions using a marker
(as shown in Figure 4.10).
Figure 4.10
mark the hole positions using a marker
Step 4 Drill holes using a hammer drill and install expansion bolts, as shown in Figure
4.11.
DANGER
Before drilling the hole on the wall, ensure no damage on the electric
wire and /or water pipe inside the wall.
