PRELIMINARY WARNINGS
WARNING: The full content of this manual must be read before any operation.
The
module must only be used by qualified electricians.
Specific
documentation
is
available
at
The word
WARNING
preceded by the
⚠
symbol indicates conditions or actions that put the
user's safety at risk. The ward
CAUTION
preceded by the
⚠
symbol indicates conditions or
actions that might damage the instrument or the
connected
equipment.
The warranty shall become null and void in the event of improper use or tampering with the
module or devices supplied by the manufacturer as necessary for its correct operation, and
if the instructions contained in this manual are not followed.
The module must be repaired and damaged parts replaced by the Manufacturer. The
product is sensitive to electrostatic discharges. Take appropriate measures during any
operation.
Important: Obstructing ventilation slots with any object is prohibited. Installing
the module next to devices that generate heat is prohibited.
Electrical and electronic waste disposal (applicable in the European Union and other
countries with recycling). The symbol on the product or its packaging shows that the
product must be disposed of at a collection centre authorised to recycle
electrical and
electronic waste
.
INSTALLATION ON AND REMOVAL FROM THE IEC EN 60715 RAIL
Insertion onto the OMEGA IEC EN 60715 rail:
1) Move the two hooks on the back of the module
outward as illustrated in fig. 1 b.
2) Insert the rear IDC10 connector of the module into a
free slot of the OMEGA rail accessory as shown in fig.
1a. (insertion is univocal as connectors are polarised).
3) To secure the module to the OMEGA rail, tighten the
two hooks on the side of the IDC10 rear connector as
illustrated in Fig. 1a.
Removal from the OMEGA IEC EN 60715 rail:
As shown in figure 1 b:
1) With the help of a screwdriver, pull the two hooks on
the side of the module outwards.
2) Slowly extract the module from the rail.
ENGLISH - 6/8
Fig. 1a
Fig. 1b