Seneca Z-UMTS HW2, Installation Manual

Page: 4 / 8

LED SIGNALS ON THE FRONT PANEL
LED Status LED meaning
SD (Red)
ON SD card mounted correctly
Medium flashing
n
0.8 sec ON 0.8 sec OFF
nnnnnnnn
Activity on SD card
Fast flashing
0.2 sec ON 0.2 sec OFF
nnnnnnnn
SD card error
OFF No SD card
ETH LNK
(Green)
Flashing Connection on RJ45 activate
ETH ACT
(Yellow)
Flashing Packet transit on Ethernet port
TECHNICAL SPECIFICATIONS
STANDARDS
EN61000-6-4 Electromagnetic emissions, industrial environment.
EN61000-6-2 . Electromagnetic immunity, industrial environment.
EN301 511 Global standards for mobile communications.
EN301 489-1 Electromagnetic compatibility for mobile radio
equipment.
EN301 489-7 Specific conditions (EMC) for mobile radio equipment.
EN60950 Security in information processing equipment.
INSULATION
ENVIRONMENTAL
CONDITIONS
Temperature
Humidity
Storage temperature
Protection rating -10 - + 50°C / (-10 - + 40°C if the internal UPS is used).
30% – 90% non condensing.
-20 - + 65°C / (-20 - + 45°C < 6 months if the internal UPS is used).
IP20.
ASSEMBLY 25Mm DIN rail IEC EN60715
INTERNAL UPS Rechargeable backup batteries. Duration: up to 1 hour.
CONNECTIONS
Removable 3-way screw terminals, 5 mm pitch for cable up to 2.5
mm
2 , IDC10 Rear, RJ45 and micro USB and 2 SMA sockets for 3G
and GPS antennas.
ENGLISH - 4/8
INPUTS
RELAY
DIGITAL
OUTPUTS
POWER SUPPLY
ANT .
NET
ANT .
GPS