ENGLISH 2/8
MI004640-E
Power supply :
Consumption :
LED status
10 – 40 V
or 19 – 28 V
(50 – 60 Hz)
1 W
- Power supply
- Data transmission via bus
- Data transmission via radio
- Test after installation
Electrical features
Communication
TECHNICAL SPECIFICATIONS
The Z-LINK1 modules represent a communication systems for data acquisition and
transmission in the process control and industrial / civil automation. Based on an UHF
modem radio, Z-LINK1 is able to comunicate with Z-PC line modules through ModBUS
protocol. Z-LINK1 represents a new platform communication in radio frequency.
Power supply and serial connection wiring facilitated by means of a bus that can be
used in the DIN guide.
Functioning modality is configurable by DIP-switch.
RS485 serial communication with protocol MODBUS-RTU
High immunity to the RF disturbs
Transparent to the ModBUS protocol
Isolation between communication and power supply: 1500 V
.
BRIDGE or REMOTE I/O functioning
GENERAL FEATURES
Interface:
ModBUS RTU protocol:
Delay between polls:
Timeout (master Modbus):
Frequency band:
Modulation:
Class of radio module:
Performance:
Radiated power:
Communication:
- RS232
- RS485
- Half-duplex functioning module (the communication
between devices occurs in alternate way)
Yes
> 250 ms (to set in the master Modbus)
> maximum between all timeout values configured in
the Easy setup software
g3, attached 1, h 1.6 ERC 70-03
DSSS
2
-3
Up to 1km (with PER<10 @ 9600 baud, in free field
conditions, with antenna accessory ANT-MAG placed
over 2 m from the ground level)
40 mW
32 nodes
