Seneca Z-KEY, User Manual, Page: 70 / 99

USER MANUAL – Z-KEY
70
Enter the TAG register address that will be accessed from TCP-IP (also from serial port if slave mode is
configured). For Seneca Modbus Standard address 1 holding register is equivalent to 40001, address 2 to
40002 etc… .
Target Modus RTU REGISTER TYPE
Select the register type from the combobox list
Target Modus RTU DATA TYPE
Select the target modbus rtu register type
Target Connected to serial port NR
Select the serial port where the slave modbus is connected to
Target Modbus RTU Start Register
Enter the Modbus Slave start register (if holding register 1=40001 etc…)
Target Modbus RTU Slave Address
Enter the Modbus RTU Slave Station address
The setup can be exported from Excel to a .cgi file (for to be imported in the webserver) or imported from a
.cgi file (exported from the webserver).