USER MANUAL – Z-KEY
63
PORT #1 MODBUS SLAVE ADDRESS
Select the Modbus Slave Station address for this Port
PORT #2 MODBUS SLAVE ADDRESS
Select the Modbus Slave Station address for this Port
PORT #1 BAUDRATE
Used to Set the port baudrate
PORT #1 BITS
Used to Set the number of bits for the serial communication.
PORT #1 PARITY
Used to Set the port parity (None, Odd or even)
PORT #1 STOP BITS
Used to Set the port parity (1 or 2; note that if the parity is set, only 1 bit can be used)
PORT #1 TIMEOUT
Used to Set the timeout on Modbus Master mode before making a new call
PORT #2 BAUDRATE
Used to Set the port baudrate
PORT #2 BITS
Used to Set the number of bits for the serial communication.
Summary of Contents for Z-KEY
Page 19: ...USER MANUAL Z KEY 19 Then click on send configuration to Z KEY button ...
Page 78: ...USER MANUAL Z KEY 78 Now Click on Launch Setup Press Finish the com0com setup will open ...
Page 87: ...USER MANUAL Z KEY 87 ...
Page 99: ...USER MANUAL Z KEY 99 UINT16 0 OK 40057 FP LSW 0 000000 FAIL ...