User Manual
Z-KEY-P
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
www.seneca.it
Doc: MI00572-1-EN
Page 15
IMPORTING A CONFIGURATION FROM A FILE
6.3.2.
A configuration that includes:
CONFIGURATION
TAG
It can be imported from a file this way:
Go to the Setup section and select the file to load, press the "Load config" button
"TAG SETUP" SECTION
6.4.
In this section you can add, edit or delete a tag.
A tag represents a variable (typically 1 or 2 ModBUS addresses depending on the type of data) that will be
converted into Profinet IO.
Using the ADD button you can add a new tag.
Using the MODIFY button it is possible to modify an existing tag.
Using the DEL button it is possible to delete an existing tag.
GATEWAY TAG NAME
It is the identifying name of the tag
TARGET MODBUS DEVICE
It represents the Seneca Modbus device selected from those available in the database.
In the case of a non-Seneca device, select CUSTOM.
TARGET RESOURCE
It represents the Seneca device variable you want to add.
TARGET CONNECTED TO
It selects the serial to be used for Modbus serial communication for the specified TAG.
TARGET MODBUS STATION ADDRESS
It selects the station address to use for the TAG.
TARGET MODBUS START REGISTER