USER MANUAL
–
Z-GPRS3, Z-UMTS, Z-LOGGER3, Z-LTE-WW
11
3.
SWITCH ON, AND SWITCH OFF THE RTU
RTUs are equipped with back-up batteries (internal UPS) to perform programmable actions in case of
blackout.
Switch ON:
1 ) Supply the RTU via screw terminals or via BUS IDC10
2) The Board will boot-up (led PWR will flash)
Switch OFF:
1) Unplug the Power supply (from terminal or from BUS IDC10)
2 ) The board is powered by internal UPS
3) Press the button PS1 until the led PWR will flash fast.
4) Release the button, the board will power off.
4.
SUPPORTED SIM CARDS (ONLY Z-GPRS3 / Z-UMTS / Z-LTE / Z-LTE-WW)
Z-GPRS3 / Z-UTMS / Z-LTE / Z-LTE-WW support the following types of SIM CARDS:
•
Top-up voice SIM CARD
•
Subscription voice SIM CARD
•
Data transmission only SIM CARD
"Zero cost" operations can be run only on voice type SIM CARDS, if the RTU receive a ring an action can be
performed.
For "top-up" SIM CARDS RTU can manage residual credit requesting the amount from the telephone service
provider.
CAUTION!
-Before inserting the SIM CARD, CANCEL ALL MESSAGES IN THE CARD USING A MOBILE PHONE.
-Before inserting the SIM CARD, CANCEL ALL ADDRESS BOOK CONTACTS ON THE CARD USING A
MOBILE PHONE.
-UMTS SIM CARDS are supported only by the Z-UMTS/Z-LTE / Z-LTE-WW product.
-The Product was tested with leading international provider SIM CARDS. However, operations are
not guaranteed with all providers.
