ENGLISH 6/8
Input V
Input mA
active 4 wires
Input mA
passive 2 wires
RTD input
2 wires
RTD input
3 wires
RTD input
4 wires
Digital output 1
Digital output 2
Outputs with free
contacts
The Z-FLOWCOMPUTER has
two digital outputs with free
contacts.
The figures show the internal
relay contacts available.
Connection of the RS485 port
The RS485 port of the Z-FLOWCOMPUTER can be connected as shown in
the figure.
Connection RJ45 ETHERNET - HMI display
(not present in the Z-FLOWCOMPUTER-B version)
The RJ45 ETHERNET cable for the connection of the HMI display panel supplied with the
Z-FLOWCOMPUTER module must be connected as shown in the figure. For further information, refer
to the MI003740-I installation manual of the Visual3 display.
Analog output (V)
Analog output (mA)
Configurable output
The Z-FLOWCOMPUTER has
an analog output that can be
configured for either voltage or
current.
The figures show the
connections.
MI003722-
E
