Seneca Z-4DI-2AI-2DO, Installation Manual

Page: 4 / 8

MI003032-E
ENGLISH 4/8
4.0 PRELIMINARY INSTRUCTIONS FOR USE
The module is designed to be installed on DIN 46277 rail (fig.1) in vertical position.
No operation on the module is allowed while it is power on.
It is forbidden
to install the module near heat-emitting devices
It is reccomended that the use and installation operations are performed by an
electrical-skilled technician
5.0 INSTALLATION
To install/remove the module on/from DIN 46277 rail, execute the following operations
(Fig.1a and Fig.1b
5.1 Installation on/removal from DIN 46277 rail
INSTALLATION
1)Pull the four latchs (placed in the back-
side panel) outwards;
2) insert the module in a DIN rail free slot;
3) make sure that the IDC10-connector pins
are inserted on the slot correctly;
4) press the four latchs inwards.
REMOVAL
1) Pull the four latchs (placed in the back-
side panel) outwards, using a screwdriver;
2) pull out the module gently.
It’s important to insert the pins on the slot correctly because IDC10-connector is polarized;
this connection is facilitied by use of a female/male insertion between IDC10 connector and
DIN rail slot (Fig 1c and Fig 1d).
Power
Supply
AC-
Power
Supply
AC+
Fig. 1d Fig. 1c IDC10
Power supply
(AC+)
P.E.
Power supply
(AC-)
A
GNDSHLD
Slot
Z-PC-DIN
B
GND
5.1 Installation on/removal from DIN 46277 rail