xVault xNVR200/300/400 User Guide V2.0.0
37
CONFiGUriNG sMTP MaiL serVer aNd eMaiL reCiPieNT
login to MegaRaID Storage Manager from desktop. Username and Password must come from an account with administrative
privileges.
Select
Tools
and then
Monitor Configure alerts
Select
Mail server
tab and enter information
sender email address
can be used to reflect identity of xNVR sending alert
•
Characters preceding “@” can be alpha Numeric, the only special character allowed is “_”
•
Characters after “@” can be alpha Numeric only, no special characters
•
the format must subscribe to email format and only use the “.com” suffix
sMTP server
may be entered as a URl or IP address
IP SMtP standard
Port
is 25. this may be changed by deselecting
Use default
authentication is supported by checking
This server requires authentication
and
filling in appropriate
User Name and Password
Select
tab and enter recipient information
New recipient email address
should use standard email address format. Click
add
to enter in stored table.
Test
will send a brief email message to all recipients in the email table. Use the
control to ensure all recipients email addresses are valid and the SMtP configura-
tion is correct.
Use
save Backup
to guarantee all Configure alerts settings are saved. the Save
Backup feature allows for multiple and different setting to be saved. If only one configu-
ration is use the MSM will hold that configuration until changed.
Load Backup
allows the loading of different previously save alerts to be restored. It
would be considered a best practice to save all alert configurations.
Click
OK
to set alert configuration information.
