Seneca S312A-4-H-4R, Manual

Page: 14 / 21

ENGLISH - 14/21 MI00250 -E 3
SET4
HYS4
Alarm 4 Threshold
Alarm 4 Hysteresis
R/W
R/W
40020
40021
Bit [15:0]
Bit [15:0]
Alarm 4 threshold: value referred to the view scale
but without decimal point. For example if the value
referred to the view scale is 20,0 sets 200. See
HI_T
for parameter limits.
Default: 1000.
Alarm 4 hysteresis: value referred to the view scale
but without decimal point. For example if the value
referred to the view scale is 10,00 sets 1000. See
HI_T for parameter limits.
Default: 10.
HI_T
Displayed value correspondent to the
maximum value of the analog output
R/W 40022
Bit [15:0]
D isp la yed i np ut v al ue cor r es pon di ng t o
retransmitted output maximum value. Set the value
referred to the view scale but without decimal point.
Example: if the value referred to the view scale is
10,0, set 100. Default: 1000.
Min value: -1999 Max value: 9999
LO_T
Displayed value correspondent to the
minimum value of the analog output
R/W 40023
Bit [15:0]
LO_D Start Scale value of instantenous view
R/W 40025
Bit [15:0]
HI_D Full Scale value of instantenous view
R/W 40024
Bit [15:0]
Set the full scale value of the view scale. Only for
input 1, 2 and 3. The decimal point on the set integer
value is given by
. Default: 1000. Min and max dP
values: see . HI_T
Set the start scale value of the view scale. Only for
input 1, 2 and 3. The decimal point on the set integer
value is given by
. Default: 0. Limits value:see dP
HI_T .
Displayed input value corr esponding to
retransmitted output minimum value. Set the value
referred to the view scale but without decimal point.
Example: if the value referred to the view scale is
10,0, set 100. Default: 0. Min. and Max value: see
HI_T