MI00472-3-EN
INSTALLATION MANUAL
3/4
CERTIFICATIONS
https://www.seneca.it/products/r-key-lt/doc/CE_declaration
INSULATION
POWER SUPPLY
Voltage: 11 ÷ 40Vdc; 19 ÷ 28Vac; 50 ÷ 60 Hz, max absorption: 1W
ENVIRONMENTAL
CONDITIONS
Temperature: -25°C ÷ +65°C
Humidity: 30% ÷ 90% non condensing
Storage temperature: -30°C ÷ + 85°C
Protection rating: IP20 (not rated by UL)
ASSEMBLY
DIN rail 35mm IEC EN60715, wall or panel with screws.
CPU
ARM 32 bit
OPERATING SYSTEM
Real time multitasking
CONFIGURATION
Configuration and FW update via webserver;
Via DIP - SWITCH
Via EASY SETUP 2 configuration software
CONNECTIONS
Removable 7-way screw terminals, 5 mm pitch, cable section up to 2.5 mm
2
Removable 2-way screw terminals, 5 mm pitch, cable section up to 2.5 mm
2
RJ45 connector for Ethernet cable
COMMUNICATION
RS232/RS485 on 1-7 terminal; maximum Baud rate 115k
ETHERNET PORTS
1 x 100Mbit Ethernet port with auto switch
TECHNICAL SPECIFICATIONS
CAUTION
DO NOT USE DEVICES WITH THE SAME IP ADDRESS IN THE SAME ETHERNET NETWORK.
WEB SERVER
To access the maintenance Web Server with the factory IP address above, use the following credentials:
Username:
admin;
Password:
admin
N.B.:
For the R-KEY-LT-P version it is first necessary to activate webserver mode
The device is normally in Profinet mode; in Profinet mode the device can be configured only through the Easy Setup 2 software.
In order to access the internal webserver it is necessary to put the device in Webserver mode using the Easy Setup2 or Seneca
Device Discovery software. It is also possible to change the operating mode by pressing the side button following the procedure:
To force webserver mode:
•
Keep the “REBOOT / MODE” button pressed until all the LEDs flash quickly
•
Release the button
•
The device restarts and the PWR and COM LEDs flash slowly to indicate webserver mode
To force Profinet mode:
•
Keep the “REBOOT / MODE” button pressed until all the LEDs flash quickly
•
Release the button
•
The device restarts and the PWR and COM LEDs stop flashing slowly to indicate Profinet mode
WEB SERVER AND PROFINET MODE (R-KEY-LT-P)
PWR
RS232/485
ETH
1500 V
ac
