User Manual
R-GWR SERIES
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
www.seneca.it
Doc: MI00568-1-EN
Page 40
SEARCH AND MODIFICATION OF THE DEVICE IP WITH SENECA DISCOVERY DEVICE
9.
When the STS LED is steady on in the R series device, it is possible to obtain the IP address that has been
set.
The software can be downloaded from:
https://www.seneca.it/en/linee-di-prodotto/software/easy/sdd
Pressing the "search" button starts the search for all Seneca devices present in the network even if with IP
addresses not compatible with the current PC configuration:
It is now possible to change the address by pressing the "Assign" button: