PT300D QuickStart Guide
Part Number BFA10082
-- 4 --
Appendix
1. Turning on your PT300D
You can turn on (i.e. power up) your PT300D by
connecting the command module to a Sensor
or Accessory Pack.
To make the connection, simply push the
command module into the pack until you hear
a click sound. Once connected, ensure the
Charger LED is ON. The color will be either red
or green.
When connecting any type of Sensor
or Accessory Pack to the Command
Module, always make sure the
connection is solid and that you hear
the confirming “Click” sound.
2. Turning off your PT300D
To turn off (or power down) your PT300D,
simply unplug the PT300D Command Module
from your Sensor or Accessory Pack.
To do this, squeeze the two tabs on the side of
the command module, then pull the module
straight out of the pack.
3. LED Lights and Status Button
SENDUM
Status
Button
Charger
Battery
Network
LED Indicators:
PT300D
Sensor or
Accessory
Pack