PT300D QuickStart Guide
Part Number BFA10082
-- 2 --
Step 2: Charging
Just like with any new mobile device, you’ll
need to charge your battery before you can
start using it. This is normally an overnight
process, or at least six hours. To do this:
• If you are using either the Basic Sensor
Pack or the Advanced Sensor Pack, you can
charge it by connecting it to the AC Adapter
and then plugging the adapter into any
standard electrical receptacle (see “Figure
3 - Charging up a Sensor Pack”.)
• If you are using an Accessory Pack with
the 10K mAh Battery Pack, the process is
similar. Just connect the battery to the AC
adapter and then plug the adapter into
the electrical receptacle (see “Figure 4 -
Charging the 10k mAh Battery Pack”.)
Device Identifier
PT300D Command
Module
Part Number
Figure 2 - Locating the PT300D Device ID
Sensor Pack
AC Adapter
PT USB Cable
Figure 3 - Charging up a Sensor Pack
Figure 4 - Charging the 10k mAh Battery Pack