Version 1.7.37R2
17
Figure 3-1
Version 1.7.37R2
18
3.2 Checking and Adding NetBEUI
NetBEUI is a protocol you can use to connect to Windows NT, Windows for
Workgroups, or LAN Manager servers. If you work on Microsoft network
environment, you need to set up NetBEUI protocol.
1. Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for
Microsoft Networks.
2. Select
Configuration
tab to check
NetBEUI -> Wireless LAN PC Card
is
installed. If no, click the
Add
button. Select
Protocol
and click the
Add
button.
3. Select
Microsoft
for Manufacturer and
NetBEUI
for Network Protocol, and then
click
OK
.
3.3 Checking and Adding TCP/IP
TCP/IP is the protocol you use to connect to the Internet and wide-area
networks. If you want to connect to Internet, you need to set up TCP/IP
protocol.
1. Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for
Microsoft Networks.
2. Select
Configuration
tab to check
TCP/IP -> Wireless LAN PC Card
is installed. If no, click the
Add
button. Select
Protocol
and click the
Add
button.
3. Select
Microsoft
for Manufacturer and
TCP/IP
for Network Protocol,
and then click
OK
.
4. If yes, double-click
TCP/IP -> Wireless LAN PC Card
to open
TCP/IP
properties
as shown in
Figure 3-2
. Due to different network
applications there are many different settings here. You can select
either
Obtain an IP address automatically
or
Specify an IP address
.
If you use the
Specify and IP address
, then you need to enter an
IP
address
,
Subnet Mask
,
Gateway
IP address, and
DNS Server
IP
address for connecting to Internet.