Quick Start Guide
TSS 6220
Form 8174B
Version 2.1
–
June 2020
Page 3
Figure 4: Setting the IP address manually in Windows
Connecting Monitor and Keyboard to the TSS 6220
It is also possible to configure the network settings of the TSS 6220 using a
monitor and keyboard connected directly to the server. Once the TSS 6220
server boots, a console screen will be shown which will allow viewing and
configuring the IP settings of the system
Figure 5: TSS 6220 Console Screen
The eth0 and eth1 IP addresses are shown on the initial main menu. If the IP
addresses are not shown or they are to be changed, press the ENTER key on
the keyboard to advance to the next menu.
The next screen allows configuration of both global network settings and also the
configuration of any of the eth ports. Select Configure Networks to change the
host name, default gateway or DNS settings. Select eth0 Adapter Status to
change the IP mode (static/DHCP), IP address, netmask or gateway for eth0.
Select the other Adapter Status selections to configure the other eth ports.
Configure the networks settings to be appropriate for your network and consult
the full user manual if more instructions are needed.
Once the network ports are configured, press ESC to return to the main menu.
Verify that the correct IP address is displayed for eth0 or eth1. A reboot is not
necessary for the settings to be applied
