11
2.2 Preparation before Installation
Before installation, the installation personnel should read through and confirm the followings:
•
Go through this user manual.
•
Has the knowledge of digital television system.
•
Has defined the sources, racks allocation, and set-up plan system wiring.
•
Knows how to operate this unit and parameters configuration.
•
Go through related engineering design documents about the system.
2.3 Equipment Wiring and Connection
To avoid electric shock and damage to the equipment, before setting up the wiring connection,
please power off the equipment and all other connected external devices. Powering on the
equipment only after all the wiring connection is completed.
2.3.1 Power Connection
Use the proper power connections is vital to the safe operation of the portable encoder. Only use
the supplied power connector or one with equal specifications.
Never
use the power connector
whose specification is different from we supplied. This could cause damage to the Portable
Encoder.
2.3.2 DC Power Connection
The DC power supply option allows the NB100U to be powered by a separate supply to supply
5V/2A
power to the DC port. To hook up the power use the following steps:
1. Locate the DC power cord which is included with the NB100U.
2. Plug the female end of the power cord (end with no prongs) into the back of the unit.
3. Connect the power cord to the power supply or power band to get the 5V/2A electricity.
2.3. 3 Connection Setup for Web Management
Connect to NB100U Management port with a network cable and set up a management network
with the management PC.
