Sencore S8100, Instruction Manual

Page: 28 / 56

8.2 Cleaning the screen filter Insert of the connection piece
The connection piece for the water supply line for wet cutting is equipped with a screen filter insert to prevent closure of
the water supply line by contamination in the supplied water.
Water connection for wet cutting:

Chap. 5.7, page 19
At a weekly interval or when there is no longer enough water supplied for wet cutting, the screen filter insert of the
connection piece must be removed as follows and cleaned thoroughly:
Danger of contamination for the water supply line!
Only open the water connection in a clean environment.
• Switch off the engine and turn the stop dial
to “0”.
Switching off the engine:

Chap. 6.4, page 23•
Remove the connection of the water supply
line. For this, remove the coupling connection
(24) from the screen filter connection piece (27)
of the water supply line in the direction of the
arrow.
• Turn out screen filter connection piece with
suitable open-faced spanner from connection
(a) of the water supply line.
• Disassemble screen filter connection piece
(27) with suitable open-faced spanner.
• Remove screen filter insert (c) from screen
filter receptacle (d) of the connection piece.
• Remove seal (b) from the screen filter insert.
• Flush the screen filter insert, the coupling
connection, both parts of the screen filter
connection piece and the seal with clean water
until all residue of contamination has been
removed.
• Push the seal (b) again on the screen filter
insert.
• Re-insert the screen filter insert with the seal
(b) in the screen filter receptacle (d) of the
connection piece in the correct direction (see
figure).
• Screw together the screen filter coupling
piece.
• Screw the screen filter coupling piece into the
connection (a) of the water supply line again.
• Push on the coupling connection again.
8.3 Idle/ Carburetor Adjustment
The cut off wheel must not rotate when idling!
The idle position must be inspected every time when taking up work and corrected if required.
24
a
27
28 SENCORE S8100 CUT-OFF SAW MANUAL