Wine and Champagne Cooler
SWC 5050
EN
EN-5
10/2010
INSTRUCTIONS FOR USE
1) Connect the cooler to the power mains by inserting the power connector into the slot and subse-
quently connecting the power plug into the power socket.
2) Place the bottle into the cooler.
3) Hold down the "POWER" button to turn on the cooler. A yellow LED diode will turn on signalling
the champagne setting. If you wish to change the temperature for red or white wine, repeatedly
press the "SET" button, which serves to switch between all three temperatures.
4) Hold down the "POWER" button to turn off the cooler.
Note
•
The silicone rim serves to improve the insulation of the temperature inside the cooler.
•
There are pressure clips inside the cooler, which help improve the contact between the bot-
tle and the cooling surface.
Warning
•
Never place bottles into the cooler that are wrapped in a transport wrapping, or which have
tags on them, etc. This could lead to a signifi cant reduction in the cooling effectiveness and
in extreme situations damage the appliance.
•
Make sure that any napkins, wipes, etc. on the bottle do not cover the infl ow ventilation
grill of the appliance, this could lead to its irreparable damage.
•
The appliance is designed only and exclusively for cooling bottles with beverages, do not use
it for other applications.
CLEANING AND MAINTENANCE
Warning
Before cleaning disconnect this appliance from the power source.
To clean the outer parts of the appliance, use a soft cloth dipped in lukewarm water. Do not use aggres-
sive cleaning products and solvents as this could damage the surface of the appliance.
TECHNICAL SPECIFICATIONS
Nominal voltage ............................................................................................... 230 V AC (alternate current)
Nominal frequency ................................................................................................................................. 50 Hz
Rated power input .................................................................................................................................. 60 W
Safety class (with regard to electric shock protection) ................................................................................II
Max. bottle diameter ........................................................................................................................ 100 mm
Amendments to text and technical parameters are reserved.