Sencor SVC 840RD, User Manual

Page: 9 / 14

Vacuum cleaner
SVC 840RD (Silenzio)
EN
EN-9
2015 02/2015
1) By pressing the clip and at the same time pulling it upwards open the vacuum cleaner fi lter area.
2) By pulling on the collar of the dust bag in the direction of the arrow, remove it from the plastic holder and
insert a new bag.
3) Close the lid of the vacuum cleaner, until you hear a click.
Changing and cleaning the outfl ow H.E.P.A. fi lter and the infl ow micro-fi lter
F
1
2
5
6
4
7
8
9
0
3
1
Lid clip
2
Grill of the infl ow microfi lter
3
Infl ow microfi lter
4
Grill of the infl ow microfi lter
5
Holder of the outfl ow H.E.P.A. fi lter
6
Outfl ow H.E.P.A. fi lter
7
Cover grill of the outfl ow H.E.P.A. fi lter
8
Clips for the cover grills of the outfl ow H.E.P.A. fi lter
9
Opening for the outfl ow H.E.P.A. fi lter
0
H.E.P.A. fi lter
1) Open the vacuum cleaner fi lter area by pressing the clip and at the same time pulling it upwards .
2) By pulling on the collar of the dust bag in the direction of the arrow, remove it from the plastic holder to
make room for the removal of the fi lter.
3) Slide out the infl ow microfi lter grill by pulling it upwards and take it out.
4) If the infl ow microfi lter is slightly soiled it is possible to wash it under running lukewarm water. In the case of
heavy soiling replace it with a new one.
5) Place a new infl ow fi lter into the grill and reinsert the grill into the grooves inside the fi ltration area of the
vacuum cleaner.
6) Reinsert the dust bag.
7) Close the lid of the vacuum cleaner, until you hear a click.
8) To replace the outfl ow H.E.P.A. fi lter, fi rst pull it upwards while holding both H.E.P.A. fi lter grill cover clips
located in the rear part of the vacuum cleaner and take the grill out.
9) Then remove the outfl ow H.E.P.A fi lter and replace with a new one.
10) If the outfl ow H.E.P.A. fi lter is slightly soiled it is possible to wash it under running lukewarm water. In the
case of heavy soiling replace it with a new one.
11) Insert a new H.E.P.A. fi lter in the same location and close the grill until both clips click in.
Note:
Never insert the fi lters back into the vacuum cleaner if they are wet or damp! Always wait until they are
thoroughly dry.