EN-10
EN
Vacuum cleaner
SVC 840RD (Silenzio)
2015
02/2015
Cleaning your vacuum cleaner
To clean the outside parts of the product use a fi ne cloth dipped in lukewarm water. Do not use aggressive
cleaning agents, paint thinners or solvents. Using these solutions could damage the surface of the product.
TROUBLESHOOTING:
Before you decide to contact an authorized service centre, please read these following tips in the
troubleshooting chart:
Problem
Possible cause
Recommended action
The engine will not start
- The power cord is not fi rmly
inserted in the socket
- The wall power outlet is
damaged
- The vacuum cleaner is not
switched on
- Insert the plug fi rmly into the
power outlet
- Inspect the power outlet
- Turn the product on
The suction output is
insuffi cient
- The product is clogged
- The dust fi lter needs cleaning
- The fi lter is clogged
- Remove the blockage or foreign
object
- Clean the dust fi lter
- Clean the fi lter
The power cord is not wound
in completely
The power cord may have slipped
down from the winding pulley
during winding.
Hold the power cord during the
winding. Apply slight tension
(by pulling the power cord back)
to the power cord during the
winding process
The power cord cannot be
pulled out
The power cord is wound up
incorrectly
Press the winding button and try
to rewind the power cord again
The speed control is not
working
The product is broken down
Have the product repaired by
technician.
(only by a qualifi ed technician)
The power cord starts to wind
in when you do not required.
The winding mechanism has
broken down
Have the product repaired by
technician
(only by a qualifi ed technician)
