Sencor SVC 7612VT User Manual Download Page 9

 2 in 1 Cordless Vacuum Cleaner

 SVC 7612VT / SVC 7614TQ

EN

EN-9

 2015

 

 09/2015

• 

When the battery is fully charged, the LED indicator A

w;

 will be lit green . Disconnect the power 

adapter A

wd

 from the power socket . 

• 

A fully charged vacuum cleaner will run for approximately 15 to 20 minutes . Then the suction power 
will decline substantially and it is necessary recharge it again .

   

Recommendations for achieving the longest possible battery lifetime:

• 

To ensure optimal performance and extend the lifetime of the battery, we recommend that you 
always allow the battery to fully charge . 

• 

Charge the vacuum cleaner at room temperature .

• 

If you do not use the vacuum cleaner for a long time, charge it at least once every 6 months .

USING YOUR VACUUM CLEANER

• 

You may use the vacuum cleaner as soon as the battery is fully recharged .

1.  Using the upright vacuum cleaner

• 

Hold the vacuum cleaner by the handle A

1

 and pulling it upwards, remove it from the charging 

base A

ql

 . After removing from the base A

ql

, the vacuum cleaner should be secured in the vertical 

parking position . After it is released from the parking position, the handle may be moved in the 
vertical direction . Start the vacuum cleaner by pressing the button A

2

 . The power of the upright 

vacuum cleaner can be increased to maximum by sliding button A

7

 towards the dust collection 

container A

0

 to the On position .

• 

You can use the vacuum cleaner to vacuum various types of floor coverings or thin carpets . The 
movement of the nozzle A

qs

 along the floor or carpet is made easier by wheels . The rotating elbow 

on the floor nozzle A

qs

 enables the cleaning of hard-to-reach places . The motorised rotary brush 

quickly and easily removes hair and animal fur . The LED light comes in handy particularly when 
vacuuming darker nooks and corners .

• 

Turn off the vacuum cleaner after use by pressing button A

2

 and clean it according to the instructions 

contained in the chapter Maintenance and cleaning . Before using it again, allow it to recharge 
according to the instructions contained in the chapter Charging the vacuum cleaner .

Note

If the button A

7

 is in the On position, it is necessary to slide it towards the handle A

qd

 to the 

Off position and only then can the upright vacuum cleaner be turned off with the button A

2

 . 

2.  Using the hand vacuum cleaner

• 

Turn on the hand vacuum cleaner by sliding button A

7

 forward towards the dust collection container 

A

0

 . The hand vacuum cleaner can be used for vacuuming furniture etc . Vacuuming hard to reach 

places is made easier by the slot nozzle attachment A

ws

 and the brush nozzle attachment A

wa

 can 

be used for vacuuming upholstered furniture . 

• 

Turn off the vacuum cleaner after use by sliding button A

7

 towards the handle A

qd

 and clean it 

according to the instructions contained in the chapter Maintenance and cleaning . Before using it 
again, allow it to recharge according to the instructions contained in the chapter Charging the 
vacuum cleaner .

Summary of Contents for SVC 7612VT













Reviews: