EN-8
EN
2 in 1 Cordless Vacuum Cleaner
SVC 7612VT / SVC 7614TQ
2015
09/2015
PARKING POSITION OF THE VACUUM CLEANER
•
To put the upright vacuum cleaner into the parking position, place the tip of your foot on top of
the floor nozzle A
qs
and with a simple forward movement of the handle A
1
secure the vacuum
cleaner in the vertical position . The tab located at the front on the elbow of the floor nozzle A
qs
will fit into the groove on the top cover of the floor nozzle A
qs
.
•
To release the upright vacuum cleaner from the parking position, place the tip of your foot on top of
the floor nozzle A
qs
and with a simple backwards movement of the handle A
1
release the vacuum
cleaner from the vertical parking position . The tab located at the front on the elbow of the floor
nozzle A
qs
will slide out of the groove on the top cover of the floor nozzle A
qs
.
CHARGING THE VACUUM CLEANER
•
This vacuum cleaner contains a built-in Ni-MH battery and therefore it is recommended to charge,
use and store it at an ambient temperature of 15–30 °C (59–86 °F) .
•
Check that the vacuum cleaner is turned off . Place the assembled charging base A
ql
near a power
socket . Insert the power adapter plug A
wd
to the socket located on the underside of the charging
base A
ql
and guide the power adapter cord A
wd
through the groove out of the base A
ql
. Insert
the power adapter plug A
wd
into an electrical power socket . After connecting to a power socket,
the LED indicator A
w;
will be lit green .
•
Place the upright vacuum cleaner, that you have previously put in the parking position into the base
A
ql
. When the vacuum cleaner is placed into the base A
ql
, the LED indicator A
w;
will be lit red .
F
•
The built-in battery needs approximately 6 hours to fully recharge . The actual charging time depends
on the power level of the battery .
Note
:
If you are charging the vacuum cleaner for the first time or if you have not used it for a long time
(longer than 3 months) then a complete charge requires approximately 8 hours or more . Before
first use or after not using it for a long time, always allow the battery to fully recharge . Do not
disconnect the power adapter A
wd
from the power socket too early .
