Vacuum Cleaner
SVC 682VT / SVC 684TQ
EN
EN-11
Copyright © 2016, Fast ČR, a.s.
Revision 01/2016
TROUBLESHOOTING
Before you decide to contact an authorised service centre, please read these following tips in the
troubleshooting chart:
Problem
Possible cause
Possible solution
The motor will not start
The power cord is not inserted
correctly in the power socket.
The power socket is damaged.
The vacuum cleaner is not
switched on.
Insert the plug firmly into the
power socket.
Inspect the power socket.
Turn on the appliance.
Suction power is weak
The appliance cleaner is clogged.
The dust bag is full.
Remove the items that have
clogged the appliance.
Replace it with a new one.
The power cord is not wound
in completely.
The power cord may have
slipped down from the winding
pulley during winding.
Hold the cable under tension
while winding the cable.
The cable cannot be pulled
out.
The cable is wound up
incorrectly.
Press the winding button of the
self winding cable and try to
rewind the power cord again.
The power control does not
function.
The appliance is out of order.
Have the appliance repaired
(only by a qualified technician).
The power cord starts to wind
in when it is not required.
The winding mechanism is
damaged.
Have the appliance repaired
(only by a qualified technician).
STORING THE VACUUM CLEANER
You may store the vacuum cleaner disassembled into its individual parts or you can store it assembled
in one of the parking positions.
