EN-10
EN
Vacuum Cleaner
SVC 682VT / SVC 684TQ
Copyright © 2016, Fast ČR, a.s.
Revision 01/2016
2) By pulling on the collar of the dust bag in the direction of the arrow, remove it from the plastic
holder and insert a new bag.
3) Close the lid of the vacuum cleaner, until you hear a click.
Replacing and cleaning the inflow micro-filter and outflow H.E.P.A. filter and micro-filter
F
1
2
3
4
5
6
1
Clip for locking and releasing the lid
2
Inflow micro-filter
3
Grill of the inflow micro-filter
4
Outflow micro-filter
5
Outflow H.E.P.A. filter
6
Grill of the outflow micro-filter and H.E.P.A.
filter
1) Open the vacuum cleaner filter area by pressing the lid clip while pulling it upwards at the same time.
2) By pulling on the collar of the dust bag in the direction of the arrow, remove it from the plastic
holder to make room for the removal of the filter.
3) Pull the inflow micro-filter grill towards yourself and take out the micro-filter.
4) Simultaneously press both PUSH buttons at the rear of the vacuum cleaner. This will tilt out the rear
grill of the outflow micro-filter and H.E.P.A. filter. Put the grill aside and take out both filters.
5) If the micro-filters are slightly soiled, it is possible to wash them under running lukewarm water. If
the H.E.P.A. filter is slightly soiled, it is possible to quickly wash it under a weak current of running
lukewarm water. This will remove dust and dirt found on its surface. In the event of heavy soiling,
replace the filters with new ones.
6) Allow washed filters to dry naturally. Do not dry them over heaters or using hair dryers. Then put
the inflow micro-filter, outflow H.E.P.A filter, micro-filter and the grills back in their place.
7) Return the dust bag.
8) Close the lid of the vacuum cleaner, until you hear a click.
Attention:
Never insert the filters back into the vacuum cleaner if they are wet or damp! Always wait until
they are thoroughly dry.
Cleaning your vacuum cleaner.
To clean the outside parts of the appliance, use a fine cloth dipped in lukewarm water. Do not use
aggressive cleaning agents, paint thinners or solvents. Using these solutions could damage the surface
of the appliance.
