10/2018
- 3 -
Copyright © 2018, Fast ČR, a.s.
■
Ideally, locate the charging station against a wall so that there are no stairs or
obstacles within a radius of 1.5 m, which would prevent the robotic vacuum
cleaner from returning to the charging station.
■
Do not tamper with the charging station when you have wet hands.
■
Ensure that the robotic vacuum cleaner has the inflow filter correctly installed
in the dust container before putting it into operation.
■
When the robotic vacuum cleaner is in operation, the doors leading outside,
on to the balcony, terrace, etc. must be closed. Clothing, paper, toys, fragile
items, power cords and other cables and all other items that could be
impacted or caught by the vacuum cleaner must be removed from the floor
surfaces. Lift curtains and drapes that reach to the floor so that they do not
get caught in the vacuum cleaner. The robotic vacuum cleaner may be used
in rooms with installed in-floor power sockets only when the in-floor socket
caps are closed.
■
When the robotic vacuum cleaner is running, watch out for children and
household pets.
■
When the robotic vacuum cleaner is running, ensure that the air outlet
openings are not covered and that the suction opening is not blocked.
■
Do not use the robotic vacuum cleaner to vacuum the following items:
– smouldering cigarettes, burning or flammable items, matches or ash;
– oils, water and other liquids;
– sharp items, e.g. splinters, needles, pins, etc.;
– flour, wall plaster and other building materials;
– animal excrements;
– larger pieces of paper or plastic bags, which can easily block the suction
opening.
■
Before every cleaning, disconnect the charging station from the power socket
and set the switch located on the underside of the robotic vacuum cleaner
to position 0 (off). Do not submerge the robotic vacuum cleaner, power
adapter or the charging station in water or any other liquid, do not wash it
under running water and do not spray it with water.
■
Do not place any items on to the robotic vacuum cleaner and do not step
or sit on it. Otherwise, this could lead to its damage.
■
Make sure the power adapter power cord is not touching a hot surface.
■
If the power adapter power cord is damaged, it must be replaced by an
authorised service technician or by a similarly qualified person, this will
prevent the creation of a dangerous situation.
