Sencor SPT-225, User Manual

Page: 9 / 12

EN - 7
USB Operation
The unit is designed to play MP3 fi le on the USB fl ash-drive.
If the fi les on the USB device do not con fi rm to the standard,
they may not be played back properly.
1) Insert the USB fl ash-drive into the USB socket on the unit. Make sure no AUX-in device is
plugged.
2) Slide the FUNCTION switch to CD/USB/AUX position to turn on the unit.
3) If the unit is in the CD mode, press and hold the PLAY / PAUSE button for more than 1 second
to switch to USB mode. “USB” icon will be shown on the display. (To switch back to CD mode,
press and hold the PLAY/PAUSE button again for more than 1 second. The “USB” icon will be
disappeared.)
4) After reading the USB fl ash-drive, the unit will display the total number of fi les on the fl ash-drive .
USB playback
After reading the USB fl ash-drive, press the PLAY/PAUSE button once, the fi rst track/ fi le on the
USB fl ash-drive will be played back. The “MP3” icon will be displayed during playback.
Play/Pause Control
To pause playback temporarily by pressing the PLAY/PAUSE button. Music playback will be paused
and the current elapsed track number will be shown on the display and the play icon will be blinking.
Press the
PLAY/PAUSE button again to resume playback.
Stop playback
To stop playback, press the
STOP
button on the unit. The total number of tracks/ fi les on the USB
fl ash-drive will be displayed.
Skip track
During playback, press the forward or backward SKIP buttons to skip to the next or previous track/
fi le.
High-speed music search
During playback, press and hold the forward or backward SKIP buttons to skip/search through
the current track/ fi le at high speed in forward or backward directions. When the SKIP buttons are
released, normal playback speed will be resumed immediately.
10+ / control
Press and hold the 10+ / button to advance the music search by increment of 10 tracks.
Press the 10+ / button once to advance to the next folder on the USB fl ash-drive.