EN - 9
RADIO Operation
The unit is designed to receive FM Stereo / FM and AM radio bands.
1. Slide the
FUNCTION
switch on the side of the unit to select
RADIO
mode.
2. Slide the
BAND
switch on the side of the unit to select
FM
ST , FM
or
AM
band.
3. Adjust the
TUNING
knob on the side of unit to tune the frequency of desired radio station.
4. The tuning frequency will be displayed on the
LCD
display.
5. For the FM stereo mode, please slide the BAND switch to
FM ST
position. The
FM ST
. indicator
will be lighted up when the reception signal is strong.
6. For the FM mono mode, please slide the BAND switch to
FM
position. The
FM ST
. indicator will be
turned off.
7. For the AM mode, please slide the BAND switch to
AM
position.
Remark:
The unit has built-in AM ferrite bar antenna, which can provide adequate reception in most areas.
If the AM reception is weak, try to adjust the location of the unit or relocate the unit to improve the
reception. If the FM reception is weak, try to adjust the length and the angle of the FM antenna to
improve the signal reception.
AUX-IN Operation
Setting up (AUX-IN) connection
AUX-IN jack will allow you to connect external music player or external sound source to the main
unit.
1. Plug into a 3.5mm audio cable (not included) into your external music player and connect the other
end (3.5mm jack) into the
AUX- IN
jack on the side of the unit.
2. Make sure your external music player is turned on.
3. Slide the
FUNCTION
switch to
CD/USB/AUX
position on the unit.
4. Start music playback on your external music player.
5. Adjust VOLUME knob to control the sound level of music playback from the speakers on the unit.
Summary of Contents for SPT-225
Page 2: ......
