Microwave
Oven
SMW 7026
EN
BEFORE YOU CONTACT A REPAIRMAN
In case the oven is not working:
1.
Make sure the oven is connected to the electric power supply.In case it is not, remove the power cord from the
electric socket, wait 10 seconds and insert it once again.
2.
Make sure a power failure has not occurred that may have caused an outage in fuses. In case the
aforementioned events are in order, test the electric socket with another device.
3. Make sure you have setup the correct values on the control panel and have turned on the timer.
4.
Make sure the door has been closed immediately with the help of the safety lock door system.In the opposite
case, the oven will not function.
IN CASE THE AFOREMENTIONED STEPS DO NOT HELP, CONTACT A QUALIFIED REPAIRMAN.DO NOT TRY
TO AMEND OR REPAIR THE OVEN ALONE.
INSTALLATION
1.
Make sure all of the packaging material has been cleared from the interior space of the oven such as plastic
bags, polystyrene etc.
2.
WARNING:
Check, whether or not the oven has been damaged in any way, for ex. the door does not fi t properly
or is dented, the sealing and other parts are damaged, destroyed or the hinges and door locks are loose or the
interior of the oven and doors are dented. In case you discover any damages, do not use the oven and contact
a qualifi ed repairman.
3.
The microwave oven must be placed on a fl at, stable surface, which can bear its weight even with the food
contents inside.
4. Do not place the oven close to sources of heat, in places with higher humidity or near fl ammable materials.
5.
To insure proper function the oven must have appropriate ventilation.Leave 20 cm of free space above the upper
surface of the oven, 10 cm behind the rear part and 5 cm along the sides.Do block the oven in any way. Do not
remove the oven stands.
6.
The product is designed for use in open space, not as a built-in appliance.
7. Do not use the oven without installing the rotating plate, carrier plate and power system.
8.
Make sure, the power cable is not damaged, placed under the lower part of the oven or in contact with hot or
sharp surfaces.
9. The electric socket must be easily accessible in case of immediate need to remove the electric cord.
10. Do not use the oven outdoors.
INSTRUCTIONS FOR GROUNDING
This appliance must be grounded. This oven is equipped with an electric cord, which has a grounding wire with
a grounding plug.The plug must be inserted into the electric socket, which has been adequately installed and
grounded. In case of power failure, grounding decreases the risk of being electrocuted - electricity is led through the
grounding wire in case of an outage.We recommend the oven be connected to an independent electrical circuit.Using
high voltage is dangerous and can cause fi re or a different accident resulting in damage to the oven.
WARNING
Incorrect socket grounding can lead to the risk of being electrocuted.
Note
1.
In case you have any questions concerning grounding or electrical instructions, consult a qualifi ed
electrician or repairman.
2.
Neither the manufacturer nor the dealer can accept any liability for damage to the oven or personal
injury resulting from failure to observe the electrical connection procedures.
RADIO WAVE INTERFERENCE
When using rge oven, your radio, television or similar receivers may be disturbed.
In case of interference, the following measures may be used to restrict it:
1. Maintaining the door and sealing of the oven surface clean.
2. Re-directing the radio or television antenna receiver.
3. Moving the microwave oven further from the receiver.
4. Connecting the microwave oven to a different socket with an independent electrical circuit.
EN-3
