EN-5
BEFORE USE (PIC 2)
To insert batteries into the devices,
fi
rst remove the belt attachment: lift the
attachment clip (17) and press the belt attachment upwards (18)
Open the battery compartment (20) and insert 3 AAA batteries (19) (not
supplied), ensuring that the poles are correctly aligned. Then close the lid.
USING
1. Turning the device on/off:
To turn the device on or off, hold down the ON/OFF power button (6) for
3 seconds a BEEP sound will be played to con
fi
rm.
2. Adjusting the volume:
To increase the volume, press the setting Up
▲
button (5); to reduce
the volume, press the setting Down
▼
button (4).
Note:
The volumelevel (3) is displayed on the screen.
3. Low Battery Indication
The battery is indicated by number of squares present inside the
battery icon on the LCD screen.
Battery
Full
Battery
empty
When the battery is low, the battery icon will
fl
ash and a beep will be
heard to indicate that the batteries need to be replaced
4. Receiving/transmitting
communications:
When the display is on, the devices are in the „Reception“ mode, i.e.
they are ready to accept a call or sound transmitted on the activated
frequency.
When you short press the Call/PTT (Call) (9) button, the device will
switch to the „Transmit“ mode and will send a sound signal to the other
device.
Summary of Contents for SMR 110
Page 2: ......
Page 4: ...EN 2 PIC 2 ...