Sencor SMR 110, Owner'S Manual

Page: 10 / 14

EN-8
10. Scanning for an active radio channel
Press the Up ▲ button (5) for 3 seconds: The ’Scan’ function
indicator (12) will appear on the screen and the channel (13) will scan
continuously from 1 to 8 (according to current CTCSS subchannel
setting only).
Press the Down ▼ button (4) to start scanning channels from 8 to 1
Once an active channel is found, the scanning will stop and you can
listen to the transmission.
When the transmission on the found channel stops, the scanning will
resume automatically.
Note:
If you press the Call/PTT button (9) while listening to a found channel,
the Radio’s will go back in stand-by mode on the found channel.
11. Call tones
A call tone alerts others that you want to start talking.
11.1 Setting the Call Tone
The Radio has 10 call tones.
Press the MENU-button (6) four times, “CA” is displayed and the
current call tone is
fl ashing.
Press the ▲ -button (4) or the ▼ -button (5) to change to another Call
Tone.
Press the Call/PTT - button (9) to con fi rm and return to stand - by
Mode.
11.2 Sending a call Tone
Press the Call/PTT - button (9) brie fl y. The call tone will be transmitted
on the set channel.
12. Key-Tone On/Off
When a button is pressed, the unit will beep brie fl y.
To set the key-tone.
Press the MENU-button (6) fi ve times “to” will be displayed.
Press the ▲ button (5) to turn on or the ▼ button (4) to turn off (OF) the
button tones.