Multifunction Electric Can Opener
SMO 6601
EN
EN-7
2015
07/2015
4
3
5
Attention
:
It is not necessary to hold cans
weighing up to approx. 500 g in po-
sition while they are being opened.
When opening heavier cans, use one
hand to hold the can and place the
palm of the other hand on the top
of the motor unit A
7
to prevent the
appliance from tipping over.
When the motor stops, use one hand to
hold the can in place and use the other
hand to lift the lever A
3
. Remove the can.
If the can contains a liquid, be especially
careful not to spill it.
2. USING THE JAR OPENER AND THE DRINK BOTTLE AND PLASTIC PACKAGING OPENER
•
Make sure that the power cord is disconnected from the el. power socket before taking out the
removable parts or before reinserting them into the appliance.
The jar opener A
1
is made from a flexible
material and so it can be used for lids of
various sizes.
Before using, take the jar opener A
1
off
the motor unit A
7
as follows. Place the tip
of your index finger into the groove in the
rear part of the motor unit A
7
, release
the jar opener A
1
by lifting it up and then
take it off.
Using opener A
9
for opening glass bot-
tles.
